10 RFC All Silver Teflon® PL-259 Connectors W/Silver UG-175 Reducers For RG-58

Description

"Better than Amphenol"
and
"Easier to solder
"
are some comments we've received from buyers about our RFC Brand PL-259 connectors. And the price is right!
Thank you for visiting our store. We would like very much to be your quality RF Connector source.
Your purchase will consist of Ten (10)
RFC 63-1SP-3279
Silver PL-259 straight solder connectors and Ten (10)
RFC
63-58S
(UG-175) Silver Reducers for RG-58, RG-141, RG-142. RG-400 and LMR-195 coax, and other coax with an outside diameter of .195-inches. The 10 reducers are s
ealed in factory packages.
Without the reducers, this connector may be used with RG8, RG-213, RG-214, Belden 9913, Belden 8214, LMR-400 and other 400 series coax cables.
We have these same 10  PL-259's with 10
RFC 63-89S
Reducers for RG-8X (mini-8), LMR-240, and other coax with ~ .240-inches including RG-59 in another auction which is EBAY item number
150550198540
Included with your purchase is the product data sheet with mechanical drawing, coax cable stripping dimensions and assembly instructions for with & without reducers. Personal, friendly and fast shipping service is also included.
Look closely at the fit & finish of this connector. We've provided a photograph of the actual connector, not a stock, representative or generic photo or drawing.
Generic, stock or representative photos, copied from manufacturers websites, are often used when selling inferior items, or an entirely different item.. Why would a seller not photograph the actual product he wants to sell?
Soldering is a
craft requiring
proper tools including the correct solder alloy
, correct flux content, correct heat and other tool aids. It requires proper preparation of the components to be joined and it also requires skill.
Years ago, minimal soldering skills could
accomplish acceptable soldering connections
for RF connectors on coax.
Today,
low loss
coax cables such as LMR and others, use gas-injected foam technology replacing the old solid polyethylene dielectric (insulator).
This technology, while creating a
superior conductor, has conversely introduced a potential problem, especially
for the occasional soldere
r. A little too much heat applied
during the soldering process, can easily result in
damage to this temperature sensitive foam
insulator
, resulting in distortion and melting,
creating a brown, tarry substance
ultimately resulting in impedance characteristic changes to
the cable.
My suggestion / recommendation
for all levels of soldering skills is to
always
use connectors with a Silver Plated
body and tip
, which not only greatly speeds up the soldering process helping eliminate
o
verheating
, but also enhances RF signal
flow
.
Mechanical:
Superior quality construction. The connector body, shell and center pin are all 30-micron silver plated.
The premium silver plating assures a quick and positive soldering experience.
The dielectric is
DuPont™
Teflon
®
known for its inert properties, permittivity, strength, and higher withstanding voltages over a wide range of frequencies and temperatures.
We've received nice comments about this connector from many purchasers in our feedback.
Elec
trical:
50-Ohm impedance, variable, DC to 300-Mhz (Commonly used up to 512-Mhz range), Voltage Rating of 500V Peak. Operating temperature range is from
-65C to 165C (-85F to 329F)
.
RoHS Compliant
by Directive 2002/95/EC.
We gladly combine shipping with our other items.
SHIPPING INFORMATION:
Free V
ia First Class Mail with 2-5 day normal delivery time.
No international Shipping
Email with questions.